Pro-Graad DT-1 Abrasive Disc Trimmer Extends Resin Fiber Disc Life 2X-3X

Stop throwing away half-used abrasive discs. The Pro-Graad DT-1 Adjustable Abrasive Disc Trimmer/Cutter lets you reclaim usable life from worn resin fiber discs by trimming away the dulled outer diameter and exposing fresh, sharp abrasive underneath. What used to hit the scrap bin now goes back on the grinder. The DT-1 uses an exclusive double blade cutting system—upper and lower blades work together for clean, consistent cuts hundreds of times over. When the blades finally wear, swap in replacements and keep going. No downtime, no buying a whole new tool. Operation is simple. It works like a can opener: place the abrasive disc abrasive-side-up, apply pressure with the upper handle, and slowly rotate the hand crank. You get controlled, even trimming with factory-quality edges every time—no torn material, no wasted surface. Trim resin fiber discs down to 4", 4.5", 5", 6", or 7" diameters so a single disc keeps working across multiple grinders and applications. Reclaim up to four additional usable edges from each disc and extend abrasive life 2X–3X. That's a direct cut to your consumable spend. Built for the people who burn through discs daily: welders, metal fabricators, finishing shops, industrial maintenance crews, and production environments. If abrasive cost is eating your margins, the DT-1 pays for itself fast.

• [IN THE BOX]: 1 each Pro-Graad DT-1 Adjustable Disc Cutter Trimmer. Start with 9", 7", or 4.5" resin fiber discs. Trim 9" down to 7", 6", 5", 4.5", or 4"; trim 7" down to 6", 5", or 4.5"; trim 4.5" down to 4" — factory-fresh edge every time.
• [EXTEND DISC LIFE 2X-3X & RECLAIM FOUR MORE EDGES]: Trim the worn outer diameter of resin fiber discs to expose fresh abrasive, reclaiming grinding and sanding surface from partially worn discs while cutting waste and abrasive costs.
• [FACTORY-FRESH EDGE CUTS EVERY TIME]: The Pro-Graad DT-1 delivers clean, consistent, factory-quality edge cuts that maximize abrasive performance and disc usability.
• [DOUBLE BLADE CUTTING SYSTEM]: Exclusive upper and lower blade design cuts smoothly and consistently for hundreds of cuts, with replacement blades available for continued long-term performance.
• [SIMPLE HAND CRANK OPERATION]: Works like a can opener for controlled, even trimming. Place the disc abrasive-side-up, apply pressure with the upper handle, and rotate the crank to trim down to 4”, 4.5”, 5”, 6” or 7” diameters.
• [BUILT FOR FABRICATION & INDUSTRIAL USE]: Ideal for welders, metal fabricators, finishing shops, and maintenance crews looking to maximize abrasive efficiency and reduce consumable costs.